crank lever मीनिंग इन हिंदी

उदाहरण वाक्य

1. The Bell crank lever rotates around the Fulcrum point.
2. The crank lever also operated a check working against an extension of the hammer butt and raised the damper wire.
3. The brazed lug tubular frame was fully sprung with quarter elliptic rear springs and'girder'front forks with horizontal springs compressed through bell crank levers.
4. One end of the Bell crank lever is connected to the pipe  P, the other end is connected to the spring by the tie rod.
5. The cast track driving wheel with removable sprocket ring was located in front, and the track idler with a crank lever tightener was located in the rear part of the vehicle.
6. In this action a flexible tie fastened to the hammer butt and to a wire mounted on the crank lever has the same function as the dog spring from the 1826 double action.
7. When the pipe moves up the bell crank lever will rotate ( in the clock wise direction ) & the tie rod connected to spring will be pushed out thus allowing the spring to expand or relax.
8. This Koach was restored in the summer of 2011 with new black pearl paint, pie crust cheater slicks, new brass lantern lights, torque thrust mag wheels, smaller skull radiator cap, and had the dummy crank lever removed and sealed.
9. Thus when the pipe moves down from cold to hot condition, the point P moves down, and as it moves down the Bell crank lever will rotate in the anti clock wise direction & tie rod connected to the spring will be pulled in, by which the spring gets further compressed.
10. In 1856 A . N . Wornum patented improvements to downstriking actions with a spring to keep the crank lever in constant contact with the key, as well as a new arrangement for the regulating button to allow easier adjustment and a method for improving repetition with a spring, and in 1862 patented further improvements with the aim of rendering the action very compact by moving the dampers below the hammers and operating them by projections attached at the far ends of the escapement levers.